3dprintforums logo

CNCzone Network:  RFQwork :: 3Dprintforums :: Welderzone :: Google+ :: Our Facebook :: Twitter :: SiteMap



Results 1 to 3 of 3

Thread: 6M-B has alarm code "607 PC", can anyone advise?

  1. #1
    Registered
    Join Date
    Jun 2010
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    6M-B has alarm code "607 PC", can anyone advise?

    Replaced two boards relating to monitor. Monitor now working but have "607 PC" error code. Can't move table, switch to edit mode, MDI mode, etc?

    Any help is appreciated.

    Thank you.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    647
    Downloads
    0
    Uploads
    0
    Rep Power
    6
    quote from maintenance manual: "data transferring error took place in MDI & CRT".
    This would be related to the MDI board, cable or the motherboard, not the CRT.



  3. #3
    Registered
    Join Date
    May 2009
    Location
    usa
    Posts
    97
    Downloads
    0
    Uploads
    0
    Rep Power
    5
    mem. is correct did u swap the connection bds ( I/O ) boards. look at the jumpers.
    also the string that goes from DIo out of the bottom of the M/B to first i/o to second i/o and on to the mdi pcb ( cables)



Posting Permissions



About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed