| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-16-2010, 03:07 PM
| |||
| |||
I HAVE AN OLDER FANUC 0T AND WE RECENTLY BOUGHT A NEW DEVICE TO SEND PROGRAMS TO THE CONTROLL CALLED LANCNC FROM CALMOTION IT FOR I HAVE 2 FANUC 0T ONE IS MODEL A & ONE IS B. WITH THE B WORKS FINE THE A ON THE OTHER HAND WONT READ THE % AT THE END OF THE PROGRAM AND DOSENT KNOW TO QUIT READING, I HAVE TO UNPLUG THE DEVICE TO STOP IT. HERE ARE MY LANCNC PARAMETERS: Baud=9600 DATA/PAR/STOP=7 even 2 FLOW CONTROL=SW Xon/ xoff EOB DELAY=No delay EOB CHAR=Cr Lf START TX =% END TX= % START RX=auto HERE ARE MY FANUC PARAMETERS: TVON = 0 ISO = 1 I/O = 0 PWE =0 SEQ=1 parameter: 0002 =00100011 0038 =11001000 0552 = 11 THE PRAMETERS ARE IDENTICAL ON THE A AND B BUT ONLY WORKS CORRECT ON THE B CONTROL. ANYONE HAVE A CLUE?  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PC to Fanuc File Transfer | rbcmetalwork | Fanuc | 6 | 11-18-2009 08:50 PM |
| PC to Fanuc File Transfer | rbcmetalwork | Sharp CNC | 0 | 11-05-2009 01:32 AM |
| fanuc control rename sub routines on file transfer? | yrdnalffej | Fanuc | 4 | 10-18-2009 03:56 PM |
| Parameters No. for file transfer on a Fanuc O-mate controller | Niall | Fanuc | 8 | 06-03-2009 08:14 AM |
| File Transfer | roninB4 | CNCzone Club House | 3 | 08-27-2006 11:05 AM |
| | |
Linear Mode
