Need Help!- simulation in Fanuc 0imc

[ahmed4040]

i have a machining center with control Fanuc 0imc and manual guide i as an option.

is it possible to use tool path simulation to see animated tool path drawing ??

if yes ... kindly tell me how to do that step by step.

thank you all

[ahmed4040]

any help ???

[fanuc-support.c]

Hello, sorry i sent the answer to this to your inbox.

[fanuc-support.c]

Also see this.

http://cnczone.com/forums/showthread.php?t=79138

[ahmed4040]

Dear all,

after putting D after tool change, the solid simulation appeared.

the problem now is : simulation is working ok but when the machine not running, i need to make simulation appear while my the NC program running (during machining).

so what do you think.

[Ozemale6t9]

Originally Posted by ahmed4040 Dear all, after putting D after tool change, the solid simulation appeared. the problem now is : simulation is working ok but when the machine not running, i need to make simulation appear while my the NC program running (during machining). so what do you think.

AFAIK solid simulation is not possible during operation due to CPU consumption. You can, however, have tool path simulation during operation in the MGi screen by pressing the toolpath softkey.

regards, Oz

[ahmed4040]

do you mean that solid simulation is not working during machining ?