Thread pattern vice knurling Help

[47MLB]

I am trying to set up this portion of programming to make a simple thread in about .5" and thread out .5" on the .920 dia stock, The depth of thread pattern .020.
the thread is in the place of knurling so I just want To thread in and thread out giving a diamond shapes.
control is OTC.
I use a G92 for my threading cycle on another program I have been trying to use the G76 multi-spiral cutting cycle. I am not having much luck.
Any help or suggestions will be appreciated.
Thanks
47MLB
T1115;
M4 S300;
M8;
G0 X1.0;
G0 Z0.02;
G76 X0.88 F0.01;
z-0.6 f0.01;
g0 x1.05;
m5;

[47MLB]

I just gave it a G1 with a feed and just experemented tiwth the feed in and out till I got the pattern I was looking for.
Thanks