Help Please, Mori MV 35 w/ Fanuc 6M B

[SteveY]

Alarm screen reads;

220 - +Y OT
221 - -Y OT

The table and ram travel in X & Z fine. The table won't come out of the Y+ OT position. Tried to JOG with Y-, NOPE, reset does nothing, manual control wheel won't back off the table from the y+ position. Reset won't kill either alarm.

Everything worked fine until I left the building.

What am I overlooking?

Thanks

[greenery_fr]

Hi

Is your machine have PC

[SteveY]

Haven't plugged a PC into the machine, just using the machine's monitor.

[greenery_fr]

No not personal computer. Fanuc 6B they have option card (PROGRAMABLE CONTROLLER), check parameter 3 bit 7 if =1 that mean your machine have PC if =0 that mean your machine do not have PC

[underthetire]

Please see my post on your other post.