Programming G68 error 1049 ON FAGOR 8055T

[claudiu220405]

Hy all
I have this prorgam:
N10T1M6
N20G0X150Z100
N30G92S1200
N40G95G97F0.4S500M3
N50G0G90X50Z3
N60G68X0Z0C0.4D0.3L0.15M0.1F0.3H0.2S70E150
N70G1X17Z0
N80X20Z-1.5
N90Z-15
N100X28
N110X30Z-16
N120Z-30
N130X46
N140X47Z-0.5
N150Z-50
N160G0X150Z100
N170M30

I set up my tool options X,Y, all the angles A,L, etc. and when I want to execute my prorgam I get this error 1049, that say that I do not have my position point good or something like this.
What can I do?
Or someone with a postprocessor for Fagor 8055T for SolidCam, I will appreciate this!
Someone help me pleaseeeeeee!

[Txapas]

hi!
try typing:
N65 goto n160


and the movement of .5 in z axis in block n140 is right? or must be z-30.5 or g91 z-0,5. Sorry but I've not the post for Solid

[claudiu220405]

hi!
try typing:
N65 goto n160


and the movement of .5 in z axis in block n140 is right? or must be z-30.5 or g91 z-0,5. Sorry but I've not the post for Solid

Yes at N140 is wrong, is Z-31, I writed in hurry that.
My sets in the Documents pallete is in metric not inch.
Any Idea?
I attach my post here, maby someone can help me

[mzar]

You should be included the first point of your profile in the program and s__ value should be the point block number.