8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low


Results 1 to 1 of 1

Thread: 8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low

  1. #1

    Default 8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low

    Hi all,

    anybody has a clue or solution for Error 307 - dc bus voltage low?
    the spindle drive of a lathe ends up with this error.
    x,z drives work properly. when connecting the drive by rs232 to the pc, the dc bus voltage is always the same 387V even if the other drives show the correct voltage.

    any hint will be greatly appreciated.

    Similar Threads:


  2. #2
    ghosh7778's Avatar
    Join Date
    Dec 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hi all,

    anybody has a clue or solution for Error 307 - dc bus voltage low?
    the spindle drive of a lathe ends up with this error.
    x,z drives work properly. when connecting the drive by rs232 to the pc, the dc bus voltage is always the same 387V even if the other drives show the correct voltage.

    any hint will be greatly appreciated.[/QUOTE]



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low

8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low