01-04-2011, 01:03 PM
|
 | | | Join Date: Feb 2007 Location: USA
Posts: 119
| |
Gentlemen,
We have attempted twice to have the memory reversed with improvements to stay away from any copywrite issues, and the problem we run into is the program module on the memory board. This contains programming to work with the processor directly and unless someone has the ability to copy the Prom, understand the programming, improve it, redesign the board to work properly and test, we are all dead in the water. In other news, the 8 meg memory upgrade is now below $1,000 thanks to fierce competition that we and a couple of others have offered Mag Fadal. This board used to be around over $2k several years back as I remember, as are many parts far less than they used to be thanks to our free market system...which was not so free years ago and before we began offering options to Fadal owners in 2001. The ever fierce Haas HFO network of good 'ole boys will be broken open next, but they are battling us every step of the way in court. Stay tuned.....
Brian D. FadalCNC |
Similar Threads 
Linear Mode
