![]() | |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| This forum is sponsored by: |
![]() |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
| |||
| |||
I found these sitting on top of the main transformer in the rear cabinet of my 94 VMC15. http://i445.photobucket.com/albums/q...c15sdparts.jpg Any ideas where they go? ![]() I found the brown cap inside the spindle drive. It's a baldor vector drive, but it's an older one probably the original. I was in there changing a blown fuse. |
|
#3
| |||
| |||
| Oh I made a post about this a long while ago. I forget the name of them, but was told there not really needed ( which I think is Bull****) Fadal didnt tell me they werent needed. the company I bought my fadal through did. I needed a new drive anyway. I'll screen shot the pic for you neal Let me see if I can find the post. They typically fall out during shipping. Neal you will know what they are. there about the size of a half dollar and they come on the baldor drives I think there is 3 or 4 of them |
|
#5
| |||
| |||
| heres my post from a while ago. they are Called MOV's http://www.cnczone.com/forums/showpo...48&postcount=6 Oh yeah one other thing, Call fadal they are very good and will guide you through the checking part step by step.. The 9volt battery test will blow your mind |
| Sponsored Links |
|
#6
| ||||
| ||||
| DELW-- The red circular pieces are broken off capacitors from the 1170 surge supressor board. Check this board out and if it is damaged then replace it ASAP. The darker cylinder I can't make out enough detail to identify it. Neal |
|
#7
| |||
| |||
| The brown cylinder is a capacitor with 2200uf and 16v marked on the side. I see a few in the drive, and I even see a spot where it looked like one broke off. I found this inside the drive. Where is the 1170 board, is it inside the drive? I found the red things on the transformer under the drive. But they could have bounced out of the drive when the machine was being moved. |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem- Confused about magic smoke event.. | skullworks | Gecko Drives | 3 | 09-07-2009 02:43 PM |
| Lathemaster ZAY Looses Magic Smoke in Motor | bill south | Benchtop Machines | 12 | 11-20-2007 08:28 PM |
| Powered up, No magic Smoke Lost, But no Response Either | Mr.Chips | Xylotex | 8 | 06-23-2007 09:51 PM |
| testing motors without letting the magic smoke out? | Sporqster | Xylotex | 2 | 08-09-2006 03:07 PM |
| Need to refil the magic smoke | runnoahrun | General Electronics Discussion | 0 | 11-30-2005 11:20 PM |