SIEMENS 840 D SAMPLE DRILL PROGRAM

[SELECT]

Hello , we have a fadal 4525 with a siemens 840 d controler. We are using Gibbs Cam for our software. The post we have from gibbs is not working and im not familiar with how the post for this controler should look. if anyone has a basic center drill, drill prog just so i can compare and see why im getting certain alarms. thanks in advanced,

[Neal]

Here is a sample G81 drill cycle:
225 T3
N230 M6
N235 MSG ("DRILL 3 HOLES")
N240 G0 X1.75 Y2. S1500 M3 M8 ;APPROACH FIRST DRILL HOLE
N245 Z1. D1
N250 MCALL CYCLE81 (1,0,.1,-.5 ) ;DRILL FIRST HOLE
N255 X3. ;DRILL SECOND HOLE
N260 X4.25 ;DRILL THIRD HOLE
N265 MCALL ;CANCELL MODAL DRILLING CYCLE 81
N270 SUPA Z0 D0 M5 M9 ;DELETE MODAL CALL.ZAXIS TRAVERSES TO MACHINE ZERO
N275 SUPA X0 Y0


Neal

[SELECT]

thanks,
here is a sample of what i get with our post.
%N1G17G40
T8
M6
G54
S1114M3
G90G0X-.375Y-1.5F3.6
Z.15
M8
MCALL CYCLE81 (2.,0.,.15,-1.0204)
X-3.125
MCALL
G0Z2.
M9
Z2.
M5
M30
%

this will only run in simulation when i delete the first line then when i run the simulation, this is giving me an alarm ; channel 1 block selected program C:\DH\WKS.DIR\FROMCOMP.WPD\SAM or access permission not avaliable.

i put the program you sent me and it gives me the same alarm ,, maybe i am not loading it correctly?

[Switcher]

Maybe this will help?

http://bleiercnctraining.blogspot.co...6/cycle81.html