| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-30-2009, 08:14 AM
| |||
| |||
| All axis will not move Hello , i have a fadal with a siemens 840 d controller. We just got this machine so im not too familiar with it. Everything was working fine and now the x,y and z will not move. The numbers on the screen are moving as normal when trying to jog. But no axis will move. This started after a day of using it. The machine is presently not at its home position, i can not bring to home position due to not being able to move any axis. The feed is not at 0. Tried restart, reset, shut the machine completely off. There is oil and air pressure. Everything seems to be normal on controller. Any help would be much appreciated. thanks,    |
|
#3
09-30-2009, 10:42 AM
| |||
| |||
| Check the door switch? Did you close the door?
__________________ Need help with your Fadal? Send me a message or visit www.TheFadalParts.com. We have over 25 years of experience at Fadal and offer FREE TECHNICAL SUPPORT OVER THE PHONE! |
|
#4
09-30-2009, 11:16 AM
| |||
| |||
| The only thing i have selected is the mpg, to jog it. The doors are closed. I have tried all options for the axis to move in small increments to large increments. I also keep making sure the feed is not at zero. Its wierd bec it shows the coordinates are moving on the screen but its almost like the x,y,z are all stuck....?? |
|
#5
09-30-2009, 11:37 AM
| |||
| |||
| PM me your phone number and I will try to walk you through it.
__________________ Need help with your Fadal? Send me a message or visit www.TheFadalParts.com. We have over 25 years of experience at Fadal and offer FREE TECHNICAL SUPPORT OVER THE PHONE! |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Y axis dont move | oneeye | Laser Engraving & Cutting Machines | 3 | 03-25-2009 01:16 PM |
| how to move the Z axis on a pendant | cob | Mach Mill | 2 | 12-18-2008 03:49 PM |
| how to move the Z axis | cob | Mach Mill | 5 | 08-22-2008 08:56 PM |
| What method did you use to move the x-y-z axis? | widgitmaster | Polls | 4 | 01-07-2008 02:35 AM |
| G91 B axis move? | DocHod | G-Code Programing | 5 | 11-02-2007 12:56 AM |
| | |
Linear Mode
