| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
 
08-28-2009, 09:47 AM
| ||||
| ||||
| Checked my program, and I did change the R0+.5 to R0+.325 to match the previous Z.325. I'm glad you guys are keeping me honest!  |
|
#14
08-28-2009, 08:42 PM
| ||||
| ||||
| Remember..........4 x pitch or .000???, check book!(don't remember exactly) whichever is larger for Fadal G98 init. clearance plane. More if the machine is getting long in the tooth........Also I have found that if you reduce the "Q" value by .001" per pitch, It allows a bit less stress on the tap when compression tapping. It pulls out rather than pressing in. Still accurate depth-wise if figured in to plus or minus .005" |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| tapping on a mini mill without rigid tapping??? | mls | Haas Mills | 13 | 07-03-2009 06:43 PM |
| Newbie- Rigid Tapping | dndcnc | Mastercam | 5 | 01-16-2009 10:49 PM |
| What exactly is Rigid tapping? Why people always ask does it do rigid tapping? | cjchands | General Metalwork Discussion | 23 | 12-19-2008 08:19 AM |
| Tapping head or rigid tapping | Gregory_C | Syil Products | 2 | 10-18-2008 12:49 AM |
| Rigid tapping or tapping head | wildcat | Industrial Hobbies (Support forum) | 7 | 09-24-2006 12:08 PM |
| | |
Linear Mode
