tool offset display - CNCzone.com-The Largest Machinist Community on the net!

cmo · #1 08-05-2009, 09:19 PM

on a vmc 40 with a cnc88 with i go to display the tool offset values it only display from tool number 5 and cannot page up to the first 4.... very odd anyone encountered this before or has a remedy??

Neal · #2 08-06-2009, 10:40 AM

Sounds like a corrupted memory issue. A zero memory proecdure would be in order.

Neal

denmar · #3 08-06-2009, 12:06 PM

RI THE MEMORY; IF THAT DOESNOT FIX THE PROBLEM, THEN CLEAR THE MEMORY

cmo · #4 08-07-2009, 08:30 PM

thanks ill give that a try once the current job is done

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Offset, measure the first tool and second tool	domax	Daewoo/Doosan	14	12-29-2009 10:20 PM
Changing tool diameter in the tool offset screen	Vern Smith	Haas Mills	21	09-24-2008 09:54 AM
Display Absolute on tool offset page	billm	Fanuc	0	02-14-2007 02:12 PM
Mach- Improved tool path display ( see video)	ynneb	Mach Software (ArtSoft software)	7	12-04-2006 08:53 PM
Laser tool path display....( IDEA )	ynneb	DIY-CNC Router Table Machines	41	04-10-2006 10:19 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)