Memory Expansion CNC 88

[nervis1]

Oh, duh, I totally missed those pics. I see the plugs are different. I just did not look close and assumed you had those plugs that are spaced wide.

Yea it came off of a 95'.

I just looked through Fadals site at the online parts order, I don't see that PCB listed.

Best bet is e-bay I guess if CNC pros did not have it.....cross the fingers maybe someone else will see this post and have your part.

Good luck.

Dave

[B_Bueno]

Thanks Dave...
Bill

[DareBee]

Bueno

My mem module in my '94 is the same as yours.

[B_Bueno]

Are you saying that your card in the '94 is the same as the one in my pic's on the first page?

[DareBee]

Yes

[SCHEMATICS LTD.]

hi, i am a factory trained fadal tech. i have my own service company now.
your problem is in your cpu. a -2 system was never designed to dnc.
i have complete -5 systems with 422 expanded memory for 4000.00 canadian

[B_Bueno]

I'm not looking to get that far into this. Ultimatley I'm looking for the R.E.M. 93 card which is the "upgrade" for the -2.

[DareBee]

I don't know if my machine is a -2 are not, but it DNCs perfectly fine IMO.

BTW where abouts is AMHERSTBURG (compared to Stratford), I am looking for a new (and good) Fadal service tech. also have some other references for service opportunities.

[B_Bueno]

what state are you referring to?
the -2 is the 1400-2 memory card in the machine, my machine is a '91

[DareBee]

Bueno - my post was directed towards Schema

[2alpha]

Sorry to tell you this but the pictures are of the software module NOT the memory module. In addition the CPU board does not have the expansion sockets for the memory upgrade - too old!

[SFA]

You can put almost all of the Fadal controls in DNC Mode. Instead of typing TA,1 to load to the memory, use DNC and send from your favorite DNC package. Predator CNC Editor Express will do it for $250 or step up to DNC/1 for faster communication and use the Xmodem at 115K.

You can give it a test drive of the Predator Software @ www.cncnetworking.com
You can also have our DNC package break up your BIG program in to smaller programs so it will fit into the control memory if you want. Let me know how I can help...