05-30-2009, 09:18 AM
|
 | | | Join Date: Mar 2009 Location: USA
Posts: 39
| |
Just wanted to tell y'all I appreciate the help y'all have given me thusfar, the tips and suggestions y'all have given me have seriously reduced the time it takes to both program and setup our 4020. the guy I learned from at the shop was also self-taught, so things like a quicker way to setup tool and fixture offsets, and some subroutine hints have been very appreciated. thanks again to all who have contributed.
__________________
No, really, just my .002" |
Linear Mode
