Need Help!- Fadal 3020 Siemens Tool reset

[egw]

On our regular fadals the good old setto cleans things up nicely.

On our Siemens Dual Arm changer I need to renumber the pots to match
the control.

Any of you rocket science types know the code to reset this.

I hope resetting or renumbering the tools clears up a strange problem.
on the ISO side all the tools are in magazine 1 except 3 are in magazine 9998 and I have no idea how to clear this?

Any Help would be much appreciated.

Warmest regards
geo

www.egw-guns.com

[egw]

For those out there that end up with a Siemens control...

Go to Siemens version of MDI
type in tc_ base

Kind of like our Setto

this clears the tool tables and resets the pramiters.
we needed to enter tc_base in both the shopmill side and the ISO side.

hope this helps save the next guy 5 hrs of frustration.

best regards
geo

[scadvice]

...it is frustrating at times to not see the answers. more information for us all!
Steve