Need Help!- fadal vmc 3020 spindle error

[matosjulio]

hello, everybody

i have a fadal vmc 3020 and the spindle does not start to the clockwise direction (m3), it says error #10 motor overload, but it works ok in the counterclockwise direction.

i need help

[carbidecraters]

Originally Posted by matosjulio hello, everybody i have a fadal vmc 3020 and the spindle does not start to the clockwise direction (m3), it says error #10 motor overload, but it works ok in the counterclockwise direction. i need help

Check to see what your spindle inverter drive says for an error. #10 IIRC was a line fault. You may need to send your spindle motor in for repairs and/or drive. I think for those couple of years they used a AMC drive which IIRC could not be repaired only replaced.

[matosjulio]

i don't have manual for the vector drive, do you know where i can get it