| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
02-06-2009, 11:10 AM
| ||||
| ||||
| Baseline 1/2-13 tap s130 f10.
__________________ We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts  If you have a broken down Fadal give a shout.  |
|
#3
02-06-2009, 11:35 AM
| ||||
| ||||
| To calculate the feed rates either use RPM * thread lead or RPM/threads per inch. Example for a 1/4-20 thread 500RPM * .05 thread lead = 25 inches per minute feed rate or 500 RPM/20 threads per inch = 25 inches per thread. Neal |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
