post for fadal

[lakeview]

Hello everyone. I am new here so i'd like to say hello to everyone.
i use mastercam x3 @ shop for Fadal machines but i have a little problem with Fadal post. first i don't see Fadal post 3 axis, and i can't put tool list at begining of program. Also i have to manual change to G49Z0 at the end of each tool (before tool change. So please help. thank you very much

[GM81]

Does it no have a Fadal 4 axis post? if you right click on your tool path group, at the bottom there is a set-up sheet option with all your tool data. You don't need G49, at least I don't.

[lakeview]

thank you. If you don't use G49 at the end of each tool, what format to use?

[TR MFG]

Calling a new H value cancels the current one, but I think it will work eather way.
"G2X.35Y0.I.25J0.
G1X1.25
X1.3
Y.5
G0Z.1
G0G80G90M5M9
G53Z0
M1
(1/16" EM )
T11M6
G0G90S6000M3E1X1.4713Y-2.2969
H11Z.1M8
G1Z-.0143F10.
Y-2.2809F20.
G2X1.45Y-2.2819I-.0213J.2309
G1X1.2185"

[lakeview]

Do we really need M46 before drilling cycle?

[TR MFG]

It is not required, but is a good idea if accuracy is a concern. Depending on what format you are running your machine in it may do it by default.