help identifying components

[Greg McFadden]

I recently got some partially cannibalized fadal components, that appear to be controllers of some sort. I am trying to identify them and find some documentation to see if there is any way I can make them useful.

Please see the attached pictures

thanks
Greg

[carbidecraters]

2002 Agusta 104D controller....Not many have been happy about this setup. I remember hearing that their was alot of retrofits or a recall.

[Greg McFadden]

well, in that case, I won't put much effort into it.

[Neal]

Greg--
The components you have are from a Fadal 104D control. This control was removed from the market. Although it performed well when it ran, it was not reliable. Perhaps there are some components you might put to use. There is a 24 volt power supply and an 80 gig hardrive that might be usefule. The circuit board were all custom designed. Perhaps spme of the components could be salvaged if you are inclined to do that.

Neal

[ltmquik]

I would get that stuff out of your shop as soon as possible before it infects your other equipent. VERY buggy! Melt it and recover the gold, about $900.00 Troy Oz.