Chance to buy '94 Fadal VMC-15 ...

[Surfacefeet]

They have Macros Kochev and you can use your Renishaw too.

[nervis1]

I had a 95 VMC 15 for about 4-5 years. It was a great little machine, cut anything I put in there. Mine had a "real" 10 HP Baldor motor DC drives. I upgraded the control so I could have 4 megs of memory, cost was 5k to have a current control not bad. The best thing about these is that anyone can fix them and take them apart. The manuals are very complete unlike Haas. Parts are very cheap in comparison to something like a Mazak and (at least a year or two ago) could be ordered on line right from Fadal.

Plus you have Neal here to help you out if you have a problem



Scottbob, the horse died a long time ago you can stop kicking the corpse.



Dave

[carbidecraters]

Neil D is a great resource!!

[chipsahoy]

I will support that statement,,

Neal is an asset to this forum and has lead me in the right direction many times.

Neal " You Are The Man"

Make no mistake about it...


Chips!!

[Edster]

Neil has also helped me with a few problems on my 94 VMC15. It's nice to have some inside help when you need it.