01-27-2009, 05:43 PM
|
 | | | Join Date: Apr 2005 Location: USA
Posts: 988
| |
Originally Posted by RDTS  I know this is an old post but you guys are still on cnczone so I'm asking for direction. If I have my machine set up with a VH65 and want to go to a TR65(Tilt/rotate) do I duplicate the gear from A axis (4th) to do the B axis (5th) I understand I have to get the Axis or maybe its the Amp Board with the right EProm on it. Basically what do I need to transition. The VH65 set up now is dc servos and my VMC3016 is ac (2006 reman) |
BTT for your answer
__________________ We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts  If you have a broken down Fadal give a shout. |
Similar Threads 
Linear Mode
