Need Help! PROBLEM !!!!!


Results 1 to 2 of 2

Thread: PROBLEM !!!!!

  1. #1
    Member pilot001's Avatar
    Join Date
    Jul 2011
    Location
    Hungary
    Posts
    105
    Downloads
    0
    Uploads
    0

    Exclamation PROBLEM !!!!!

    Hi !

    Any ideas ?????

    SO our 4020 VMC (DC servos , Resolvers) decided not to work....

    I got some CARDS out to inspect the Capacitors... Well the CLK board now is not working as far as i can tell...

    See the picture for SIN signal measured by me......

    PROBLEM !!!!!-sin-jpg

    Similar Threads:
    FADAL VMC4020 HT 1995, Z 28" (if true) , 88HS , 10K rmp , 21 TC geneva /rotary/ , VH-65 (A-axis) ,3ph 400V , metric, NO conveyor, No palette. (+alternative DC AMP)


  2. #2
    Member pilot001's Avatar
    Join Date
    Jul 2011
    Location
    Hungary
    Posts
    105
    Downloads
    0
    Uploads
    0

    Default Re: PROBLEM !!!!!

    Problem has been solved by resoldering a lot of "legs" 60 % of the through hole components including ICs.....

    I guess when i was replacing the Capacitors the board was stressed a bit (all are bent a bit due to wave soldering) and brore one or more spots ... lucky fix

    FADAL VMC4020 HT 1995, Z 28" (if true) , 88HS , 10K rmp , 21 TC geneva /rotary/ , VH-65 (A-axis) ,3ph 400V , metric, NO conveyor, No palette. (+alternative DC AMP)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PROBLEM !!!!!

PROBLEM !!!!!