Need Help! Tool Change Table Position


Results 1 to 2 of 2

Thread: Tool Change Table Position

  1. #1

    Default Tool Change Table Position

    I need help moving(locating) my table before tool change towards the right front of the machine using machine coordinates (away from the spindle). I have a DATC that moves the tool lower and eventually crashes to the parts itself. Is there a macro/command that i can use to call before M6? I want the Z to move to the highest location then move the XY location before making tool change. Thanks in Advance!!!

    Similar Threads:


  2. #2

    Default Re: Tool Change Table Position

    You could just create a Subroutine to position the Machine and then execute the Tool change, And then get it back where you were with another subroutine if needed.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tool Change Table Position

Tool Change Table Position