Trying to loop HAAS TM2P

[Geo55]

Trying to loop a simple program, Is it possible to loop a program that isn't canned. Here is what I have:
%
O00001
TO1 M06
G90 G54 G00 X0 Y19.0
S3000 M03
G43 H01 Z1.0 M08
G01 Z-3. F1000.
G41 X5.48 Y9.5 DO1
X10.97 Y0.
X5.485 Y-9.5
X-5.485 Y-9.5
X-10.970 Y0.
X-5.485 Y9.5
X5.485 Y9.5
G40 X10.97 Y19.
G00 Z3.0
G00 Z1.0 M09
G53 G49 Z0. M05
G54 X0 Y0
M30
%

Thank you.

Similar Threads:

• Haas Closed Loop Vector Drive 40/30 HP ...fault ??
• New or Used TM2P
• HAAS TM2P tool changing ERROR
• Need Help!- Closing the loop with Path Pilot. Possibly dual (global) closed loop?
• TM2P Tapping Problems

[MMTechi]

Not sure if you are just making finishing passes or multi locations but here is a sample of how I have used it.
I inserted your program but edit as needed.


%
O00 (PROG DESCRIPTION)
G54 G17

G90 G40 G80
T1 D1 M6
(.1875 DIA CARB EMILL -FIN PERIM )
M8
G90 G0 X0 Y0
G43H1 G0 Z1.
S6000 F20.0
M3


G0 X0. Y0.
G0 Z1.

G0 Z0.05
G0 Z0.00 (TOP OF STOCK)

M97 P001 L5 (LOOP 5 TIMES - SUB IS BELOW)

(END OF PROG)
G0 Z1.
G0 Z2. M9
G0 G40 G49 G90 Z0 M5
G28 G91 Y0
G90
M30

(---BEGIN SUB---)

N001
T1 M6
G90 G54 G0 X0 Y19.0
S3000 M3
G43 H1 Z1.0 M8
G01 Z-3. F1000.
G41 X5.48 Y9.5 DO1
X10.97 Y0.
X5.485 Y-9.5
X-5.485 Y-9.5
X-10.970 Y0.
X-5.485 Y9.5
X5.485 Y9.5
G40 X10.97 Y19.
G0 Z3.0
G0 Z1.0 M9
G53 G49 Z0. M5
G54

M99

(---END SUB---)

%