Fadal CNC88, Monitors Wrong Charachter


Results 1 to 5 of 5

Thread: Fadal CNC88, Monitors Wrong Charachter

  1. #1
    Registered Russell840's Avatar
    Join Date
    Jul 2016
    Location
    Northern Mariana Islands
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Fadal CNC88, Monitors Wrong Charachter

    Hi there


    I have a Problem With my Fadal, I Try all I can do and read at Troubleshooting Books but
    Doesn't Work.

    Last week, at the middle of work, Machine hanged and keyboard did not work correctly. Some of the keys didn't work.
    After that, I change the keyboard and its work but controller get to hang situation.
    Monitor show unclear characters, as the attached photo shows.

    Regards

    Russell

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Fadal CNC88, Monitors Wrong Charachter-photo_2017-09-27_11-02-09-jpg  


  2. #2

    Default Re: Fadal CNC88, Monitors Wrong Charachter

    yes, CPU's heart beat LED is probably not blinking.

    probably a 1400-2 system. Make sure 1030 is in the slot 8. Reseat all boards in slots 1 to 8



  3. #3
    Registered Russell840's Avatar
    Join Date
    Jul 2016
    Location
    Northern Mariana Islands
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Fadal CNC88, Monitors Wrong Charachter

    Dear Rodney247

    Thanks for your response
    my problem was solved and the reason was the startup's( Green posh button) contact relay.
    But I think I have a problem on 1030- card, wherever the operators try to connect the DNC cable data to pc, Machine goes to this condition and doesn't work, plus the CPU+DNC cards LED Doesn't Blink.unfortunately, I have not another card to test.

    what kind of the test can I do to be sure 1030 & 1400-2 are health?

    With Regards
    Russell



  4. #4

    Default Re: Fadal CNC88, Monitors Wrong Charachter

    You can go to Diagnostics from ENTER NEXT COMMAND to test your boards and stuff

    DI enter

    G 0 3000 enter

    here is the document from the maintenance manual http://itscnc.com/images/Diagnostics.pdf



  5. #5
    Registered Russell840's Avatar
    Join Date
    Jul 2016
    Location
    Northern Mariana Islands
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Fadal CNC88, Monitors Wrong Charachter

    Dear Rodney247
    Thank you very much, I kindly appreciate you for helping me.
    I will test and share here the results.

    Best Regards

    Russell



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fadal CNC88, Monitors Wrong Charachter

Fadal CNC88, Monitors Wrong Charachter