I have a Problem With my Fadal, I Try all I can do and read at Troubleshooting Books but
Doesn't Work.
Last week, at the middle of work, Machine hanged and keyboard did not work correctly. Some of the keys didn't work.
After that, I change the keyboard and its work but controller get to hang situation.
Monitor show unclear characters, as the attached photo shows.
Thanks for your response
my problem was solved and the reason was the startup's( Green posh button) contact relay.
But I think I have a problem on 1030- card, wherever the operators try to connect the DNC cable data to pc, Machine goes to this condition and doesn't work, plus the CPU+DNC cards LED Doesn't Blink.unfortunately, I have not another card to test.
what kind of the test can I do to be sure 1030 & 1400-2 are health?