Hello everyone,I bought it CNC Machine Fadal VMC15 model 914, Mechanically is good condition, but Electrical is have some problems.
Machine can started, but monitor does not want to play the image....I think the problem in the Computer Numeric Control.
The did not give me any books with my Machine .Because the machine is old.
Now, is there anyone who wants to help me with a book or instructions about her ?
On the upper left of the control there is a "video" switch for the monitor. Is it on?
Also you have to hold down the green start button for 3-4 seconds for the control to power on.
Green Button CNC Power from Back of Machine i hold and my machine started, and on the monitor Video is ON, but i don't understand the button upper left what function is doing.....
Now my servicer review the Graphic Card from the Electronics.. I'm trying to repair her factory control on this machine with my service technician, so I would be grateful that you know how to help me around to start together.
Hi
After you turn machine control with green button
All of red led on controller must be blinking (5)
If not please check com & +12 -12 vdc on powersupply