| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
 
03-02-2007, 09:12 AM
| |||
| |||
| Yes, a normal pc power supply will work, in place of a tri-mag, however you may have to change how it mounts to the cabinet. To get the power supply to work, usually it needs the dark green wire to be gounded to a black wire. Just connect these two wires together permantly, use the same color wires you need for the DC voltages (5+ red,12+ yellow,12-blue, ground black) and tape up the wires that are not needed. Here's a link for pc power supply connections. http://www.helpwithpcs.com/courses/p...htm#connectors  |
|
#14
03-02-2007, 09:37 PM
| |||
| |||
| Well once I get plowed out and can get up to the shop I will check all the things you guys have mentioned. CNCzone ROCKS!!! |
|
#15
03-06-2007, 09:57 PM
| |||
| |||
| Ok, I replaced the power supply and I am back up and running!! wooHoo!! Thanks for the help guys! |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| V2XT Software Startup | cncnavy | Bridgeport and Hardinge Mills | 8 | 02-17-2007 04:31 PM |
| oi-mc startup screen | jamesweed | Fanuc | 2 | 02-09-2007 10:58 AM |
| Hurco BMC 20 startup problem | tirebiter | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 11-08-2006 04:50 PM |
| Z axis noisy upon startup | BMackinnon | Haas Mills | 12 | 08-02-2006 06:36 PM |
| Need some startup advices... | b_cybe | DIY-CNC Router Table Machines | 15 | 03-16-2006 04:18 PM |
| | |
Linear Mode
