Bolt Hole Circle Pattern Problem FADAl CNC Mill 88
I Am trying to drill hole pattern with below specifications
I used these codes but it doesn't work properly it seems center of the holes changes for each pattern cycle.
G0 X50 Y0 Z5
G81 G99 R0+0 Z-10 F10
L9304 R0+.1 R1-25 R2-90
G80
G90
G0 X28.75 Y49.8
G81 G99 R0+0 Z-10 F10
L9304 R0+.1 R1-57.5 R2-30
(angle between 20 Dia. holes would be 32.73,dimensions mm)
what would be the best way to program fadal cnc 88 for this type of action ?
Similar Threads:
Re: Bolt Hole Circle Pattern Problem FADAl CNC Mill 88
I'm not sure where you got your numbers from, but I came up with these using the pattern center for all the locations. I didn't verify this in a control, but it should be in the ballpark.
G0 X25. Y0. Z5.
G81 G99 R0+0 Z-10. F10.
L9304 R0-25. R1+0 R2-90.
G80
G90
G0 X28.75 Y49.8
G81 G99 R0+0 Z-10. F10.
L9311 R0-28.75 R1-49.8 R2-32.7272
Re: Bolt Hole Circle Pattern Problem FADAl CNC Mill 88
thanks it works perfectly
Hi my name is Wagner DamottaOriginally Posted by PDAVANI
I’m new on CNC and i try to learn how use, i have a Fadal 2016L that i got from my friend shop and so far i learned engrave and is the only i know so far, i need make a bolt hole cicle and i’m looking for help.
BHC in my Fadal is difficult the hand write the program?
I dont know how use Fusion 360, any one can help me please.
Thank you
Wagner Damotta
Hi my name is Wagner Damotta
I’m new on CNC and i try to learn how use, i have a Fadal 2016L that i got from my friend shop and so far i learned engrave and is the only i know so far, i need make a bolt hole cicle and i’m looking for help.
BHC in my Fadal is difficult the hand write the program?
I dont know how use Fusion 360, any one can help me please.
Thank you
Wagner Damotta
Re: Bolt Hole Circle Pattern Problem FADAl CNC Mill 88
...they are call Fixed Subroutines L93xx
https://flintmachine.com/images/uplo...ubroutines.pdf
Reply with Quote
