Spindle Speed and Adjusting the Baldor Drive


Results 1 to 4 of 4

Thread: Spindle Speed and Adjusting the Baldor Drive

  1. #1
    Registered
    Join Date
    Sep 2015
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Spindle Speed and Adjusting the Baldor Drive

    The Baldor drive is running my machine 25rpm higher than programmed... how do you adjust the rpm to be perfect? I think this is my problem with ridgid tapping small diameters.

    Similar Threads:


  2. #2
    Registered rodney247's Avatar
    Join Date
    Jan 2015
    Posts
    191
    Downloads
    0
    Uploads
    0

    Default Re: Spindle Speed and Adjusting the Baldor Drive

    there is a tool to test if the machine is tracking the rigid tapping. After you adjust the spindle and your axis amps. you set it up in a tool holder and use an indicator to watch if it tracks correctly. You can also make one your self on a Lathe.

    SVT-0077



  3. #3
    Registered rodney247's Avatar
    Join Date
    Jan 2015
    Posts
    191
    Downloads
    0
    Uploads
    0

    Default Re: Spindle Speed and Adjusting the Baldor Drive

    For tuning this document might help from itscnc.com

    http://itscnc.com/images/tech%20docs...-1%20v11-1.pdf



  4. #4
    Registered
    Join Date
    Sep 2015
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: Spindle Speed and Adjusting the Baldor Drive

    thats a great document, thanks sir. will try this soon.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Spindle Speed and Adjusting the Baldor Drive
Spindle Speed and Adjusting the Baldor Drive