| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
 
01-29-2007, 07:54 PM
| |||
| |||
It turns out you either need an x or y move in the G83 line or a G45 in the line following it. It also turned out that the manual I was using is 15 years newer that the machine I am working on. It seems that Fadal actualy made some changes in that time! Who would have guessed. Thanks again for all of your input. Bob  |
|
#14
01-30-2007, 08:15 AM
| |||
| |||
| The need for x y location on the G83 line can be set in the parameters. 'immediate execute fixed cycle' set to on does not require the xy word in that line. Otherwise requiring the xy. The G80 should be included to cancel the cycle, not canceling a canned cycle can give you some issues. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mazak computer error message | buzzm | Mazak, Mitsubishi, Mazatrol | 8 | 01-25-2010 08:08 AM |
| MultiCam 3000 error message | DRolph | Commercial CNC Wood Routers | 1 | 01-11-2007 03:30 PM |
| Axis drive fault/off error message | Healey | Bridgeport and Hardinge Mills | 0 | 11-08-2006 03:49 PM |
| Mach III error message-Help | bherr | Shopmaster/Shoptask | 5 | 05-19-2006 07:11 AM |
| gibbscam error message | donder | GibbsCAM | 2 | 05-31-2005 12:16 AM |
| | |
Linear Mode
