Hi all.

I have a mix of 1010-4 and 1010-5 axis cards in my 1400-4 Fadal. These two versions of the 1010 boards can obviously operate together on a 1400-4 system so, now to my question...

Are the eproms for the linear axis interchangeable between the -4 and -5 1010 boards? And similarly are the eproms for the rotary axis interchangeable between the -4 and -5 1010 boards? I know the eproms go into different physical locations on each respective board but are they any different beyond that?

Will make interchanging the different version 1010 boards much easier if they are.

Thanks for the help!

Cheers,
Tre.

Similar Threads: