Check the spindle drive parameters.
I need help with VMC4020 with AMC and spindle with 10000rpm
I found, that spindle has wrong rpm,but noerror message.
LOW range: programed 0 - 2500 rpm: real rpm 0-800 and then still 800rpm
HIGH range: programmed 2501-10000rpm: real rpm 0-3200 and then still 3200rpm only
Where could be a problem ?
Similar Threads:
Check the spindle drive parameters.
SETP: 10.000 LOW/HIGH, GAIN 100 (range 0-255), RPM 0 (range 0-31)