Fadal power supply upgrade?


Results 1 to 9 of 9

Thread: Fadal power supply upgrade?

  1. #1
    Registered
    Join Date
    Oct 2012
    Location
    USA
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Fadal power supply upgrade?

    hey guys,

    wondering if Fadal boards can be used by superceded part numbers? I have an older 904-1 machine with a questionable power supply. The board number is 1220-3. I've seen some 1220-4c boards and was just curious if this could be an acceptable upgrade from my power supply? Thanks!

    Matt

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2012
    Location
    USA
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Re: Fadal power supply upgrade?



  3. #3
    Registered
    Join Date
    Oct 2012
    Location
    USA
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Re: Fadal power supply upgrade?

    Just a heads up incase anyone else is doing the same thing. I removed the 1220-3 board entirely and wired in a PC power supply in it's place. Works like a charm!



  4. #4
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by mnmattie View Post
    Just a heads up incase anyone else is doing the same thing. I removed the 1220-3 board entirely and wired in a PC power supply in it's place. Works like a charm!
    I've done the automation direct , power supply, 75$.



  5. #5
    Registered
    Join Date
    Mar 2011
    Location
    brooklyn park, MN
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default Re: Fadal power supply upgrade?

    Is this a plug and play deal? I also have a questionable 1220-3 power supply and need to get something setup before it fully craps out on me.
    thanks



  6. #6
    Registered
    Join Date
    Oct 2012
    Location
    USA
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Re: Fadal power supply upgrade?

    Billsnogno,

    Did you get a power supply changed out in your Fadal yet? Mine was virtually plug and play.

    Also, I see you're in Brooklyn Park......small world, what shop are you at if I may ask?



  7. #7
    Registered
    Join Date
    Mar 2011
    Location
    brooklyn park, MN
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default Re: Fadal power supply upgrade?

    Not yet. My fadal is in a garage to play with, but work at a shop also in BP, on 610 and 169.



  8. #8
    Registered
    Join Date
    Oct 2012
    Location
    USA
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Re: Fadal power supply upgrade?

    tried sending a PM but says your inbox is full.

    You're literally just down the street from me...small world



  9. #9
    Registered
    Join Date
    Mar 2011
    Location
    brooklyn park, MN
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default Re: Fadal power supply upgrade?

    Sorry, emptied my inbox, no one ever pm's me so never needed to clean it out before, doh! Where are you at? PM me so not shared online.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fadal power supply upgrade?
Fadal power supply upgrade?