Fadal power supply upgrade?

[mnmattie]

hey guys,

wondering if Fadal boards can be used by superceded part numbers? I have an older 904-1 machine with a questionable power supply. The board number is 1220-3. I've seen some 1220-4c boards and was just curious if this could be an acceptable upgrade from my power supply? Thanks!

Matt

Similar Threads:

• Powerpath 15 power supply upgrade
• Rebuild Hurco Power Supply w/ PC Power Supply VMX30
• FANUC Alpha Series power supply input power limits
• 2001 Fadal with MP32 control anyone upgrade the pc?
• Power Supply from a computer power supply

[mnmattie]

http://i.imgur.com/vCkXfi9.jpg

[mnmattie]

Just a heads up incase anyone else is doing the same thing. I removed the 1220-3 board entirely and wired in a PC power supply in it's place. Works like a charm!

[dunnitagain]

Just a heads up incase anyone else is doing the same thing. I removed the 1220-3 board entirely and wired in a PC power supply in it's place. Works like a charm!

I've done the automation direct , power supply, 75$.

[billsnogo]

Is this a plug and play deal? I also have a questionable 1220-3 power supply and need to get something setup before it fully craps out on me.
thanks

[mnmattie]

Billsnogno,

Did you get a power supply changed out in your Fadal yet? Mine was virtually plug and play.

Also, I see you're in Brooklyn Park......small world, what shop are you at if I may ask?

[billsnogo]

Not yet. My fadal is in a garage to play with, but work at a shop also in BP, on 610 and 169.

[mnmattie]

tried sending a PM but says your inbox is full.

You're literally just down the street from me...small world

[billsnogo]

Sorry, emptied my inbox, no one ever pm's me so never needed to clean it out before, doh! Where are you at? PM me so not shared online.