hey guys,
wondering if Fadal boards can be used by superceded part numbers? I have an older 904-1 machine with a questionable power supply. The board number is 1220-3. I've seen some 1220-4c boards and was just curious if this could be an acceptable upgrade from my power supply? Thanks!
Matt
Similar Threads:
Just a heads up incase anyone else is doing the same thing. I removed the 1220-3 board entirely and wired in a PC power supply in it's place. Works like a charm!
Is this a plug and play deal? I also have a questionable 1220-3 power supply and need to get something setup before it fully craps out on me.
thanks
Billsnogno,
Did you get a power supply changed out in your Fadal yet? Mine was virtually plug and play.
Also, I see you're in Brooklyn Park......small world, what shop are you at if I may ask?
Not yet. My fadal is in a garage to play with, but work at a shop also in BP, on 610 and 169.
tried sending a PM but says your inbox is full.
You're literally just down the street from me...small world
Sorry, emptied my inbox, no one ever pm's me so never needed to clean it out before, doh! Where are you at? PM me so not shared online.