T-816 transformer

[Danielboone]

Does anyone have a t-816 transformer, I have one that the voltage for servo drives has one leg that is only putting out 20v?

Similar Threads:

• Need Help!- What is this transformer
• where to buy a transformer in the uk
• transformer
• One big transformer or three?
• transformer hum

[Danielboone]

Is it possible to eliminate the transformer all together, I have 230v coming into the machine?

[zcases]

I eliminated mine, on the VMC15XT.......

Depends what VFD drives your spindle, and what power your amps need to run the motors.......

[Jet A]

Are you sure all of your taps and jumpers are in? If not this could be your issue. I would pull and check your jumper and tap wire for broken or missing copper.

I have not personally seen a transformer fail in this way. But thats not a lot of exp. talking.

[cigarfox]

The transformer retaps proper voltage to your drives, but it also taps down your voltage to 110/120 for everything else. I would take Jet's advice and recheck your wiring. In 10 years, I have seen only one bad transformer.

[Jet A]

I Came Across this Exact Issue Today LookingFor A Different Issue. This Happens When The Drives Are In Estop, It Pulls One Leg Down When Referencedp Phase To Phase.Something To Do With The Solid State Relays. Anyway, Just An Fyi. Sorry FOr The Retarded Caps, App Is All Fubar ATM

[mshepherd]

@danielboone What did you end up finding that caused your problem? Dealing with the same issue. Thanks!

[jimcisme]

I know this thread is very old, but for those that might be looking, T-816 transformer supplies 3-phase 86V AC to the DC amps board for conversion. What ever you do, if you wish to keep your DC amps this must be dealt with.