| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-17-2006, 12:33 PM
| |||
| |||
I have bought a 4th axix rotary table and was looking at the plug-in on the 4020 VMC. When I took the cover cap off of the plug-in there is 4 bent wire jumpers in the plug-in. What would their purpose be? Thanks, Scott  |
|
#2
02-17-2006, 06:21 PM
| |||
| |||
| Scott, It sounds like you took apart the plug that is to be installed when there is no 4th-axis. It jumps the connections so you can operate without getting errors. If you go to the threaded ring above that and loosen it you will find the actual connection for the 4th-axis. I accidentally did the same thing once. Alloyspec |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
