Is there a fuse panel anywhere on this machine? i accidently arced the light wire on the chassis, there for blowing a fuse. The machine came with a ton of replacement fuses but i have not been able to find where they go. The monitor does not work now. Any help would be appriciated here. thanks in advance.
First rule when working on that EMC, lock out the power at the junction box. Glad you did not get zapped.
Fuses should be on a rack in the main control cabinet, 'least that's where they are on the bigger VMCs. A look through your maintenance manual should tell you if that light lead is fused or if you need some new parts. I hope it's just some blown fuses, not a blown monitor, and system cards.
Sorry to hear that as well. When I installed the light in mine, the machine was powered down.
I hope it is only a fuse.
Posting Permissions
LinkBack URL
About LinkBacks
