Results 1 to 3 of 3

Thread: Fadal, a selection of keys quit working.

  1. #1
    Registered
    Join Date
    Jun 2011
    Location
    US
    Posts
    4
    Downloads
    0
    Uploads
    0

    Fadal, a selection of keys quit working.

    Keys - 3,5,R,W,S,X all quit working on my fadal 4020 1992 model. All the keys mentioned are sort of in a pattern on the left side of the keyboard, if you catch my drift. Has anyone had a problem like this or can atleast give me some advice? I'd hate to start replacing the keypad and keyboard when maybe its something simple.. Thanks, Andrew.


  2. #2
    Registered
    Join Date
    Jun 2011
    Location
    US
    Posts
    4
    Downloads
    0
    Uploads
    0
    The auto key is also out, which is located above the other keys that are not working.


  3. #3
    Registered
    Join Date
    Dec 2005
    Location
    USA
    Posts
    86
    Downloads
    0
    Uploads
    0
    Open up the back of the Keyboard / Control Panel. You should see a flex harness on the left side. Try using a piece of tape to change the position of the harness. See if your keys come back. I had a problem when the machine was cold, after the monitor warmed the harness it flexed such that the keys worked. Annoying.


Similar Threads

  1. G76 quit working on OT-C control
    By g-codeguy in forum Fanuc
    Replies: 17
    Last Post: 10-08-2011, 12:38 AM
  2. Need Help!- Z AXIS JUST QUIT WORKING
    By BALLISTIKIDD in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 10-02-2011, 12:24 AM
  3. Problem- Machine quit working
    By rnponti in forum Gecko Drives
    Replies: 1
    Last Post: 07-10-2011, 07:54 AM
  4. Tool changer quit working
    By acrodave in forum Mazak, Mitsubishi, Mazatrol
    Replies: 7
    Last Post: 02-21-2010, 03:05 PM
  5. ncEdit quit working
    By Cameo in forum Surfcam
    Replies: 3
    Last Post: 06-28-2007, 01:47 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.