LinkBack URL
About LinkBacks
Historically when you see two commands on a key on a keyboard you have to press the shift button to use the second command. Now you owe me a beer.
| | |
There is a red spindle on/off button our Fadal 4020 mill control. It is approximately a 2002 model. The button will turn the spindle off but not on. Have to input S5000 M03 to turn spindle on. Any suggestions?
Historically when you see two commands on a key on a keyboard you have to press the shift button to use the second command. Now you owe me a beer.
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts :) If you have a broken down Fadal give a shout.
You bet! If you're ever in the Macon,Ga area I will be glad to. Thanks again!
Posting Permissions
| | |
