LinkBack URL
About LinkBacks
I bet your not using Vactra #2 oil
My 1989 VMC is having a Z axis problem. When it rapids down it shutters and shakes the sheet metal on the machine. The Z axis is smooth when it rapids up. Can anyone help me with this?
I bet your not using Vactra #2 oil
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts :) If you have a broken down Fadal give a shout.
Yes I am using Vactra #2 oil.
You may need to tighten the straps on your Z axis
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts :) If you have a broken down Fadal give a shout.
Ok, Thanks.
Not a Fadal service expert, But may be worth swapping resolvers with another axis, Not
sure if rigid tap feature still uses resolvers? Im surprised no body else has chimed in on this one
from my experiance it could be a few things.
resolvers or broken wire 1st guess, then check brushs.
then check the chains and gears on the weight for the head. as going down it may be tightening up somewhere.
Delw
Resolver was the problem. Thanks for the help.
Well if you are talking about Z axis shutters then i have tell you one thing about this
shutters that i am also using these shutters in my office and in mu home as my windows shutters and i found these are good and quality shutters.
[url=http://adishopfronts.com/]Shutters London[/url]
Posting Permissions
| | |
