Coolant thru spindle pressure

[Bwana Don]

Hi guys,

Can anyone tell me what the coolant thru spindle pressure should be. We just did a retrofit on our filter cannister (FadalCNC.com), replaced gage and some plumbing. The gage reads about 200-210 PSI with a 9/32 CF drill. Is this the original factory psi?

Thanks in advance.
Don

Machine:
Fadal 3016HT
1998 w/10K spindle
Lightning Cool add on

[thomasz]

Hi!

In 4020HT-manual i can read:

"Range should be not less than 100 or over 250 PSI"

Thomas

[Modlar]

Haj

20 bar

LP Mare

[Bwana Don]

Thanks guys. I'm good.