topless 4020HT

[thomasz]

Hi!

From time to time we have heavy workpiece put on the table.
In shop we have a chain hoist on a portal.

Is there a chance to mod the housing and open the top side of the 4020 to put
the pieces with the crane into the machine?

Thomas

[denmar]

Remove the bolts and replace the top with a bar to hold the side panels.(left side only. right side is the hardness inside rail)

[keebler303]

you could also consider a "C" shaped fixture to reach around the lid.

Matt

[thomasz]

Problem is the high of the hoist.

So the hook with workpiece have to come from the front.

[Neal]

There was an option for that style of sheet metal for a chain hoist. Talk to Doug H. at Maintenance Technologies and see if it is still available.

Neal

[thomasz]

There was an option for that style of sheet metal for a chain hoist. Talk to Doug H. at Maintenance Technologies and see if it is still available.

Neal

Hi!

Seem's it isn't available here.

btw: I'm from germany

Thomas