or uptimecnc for downloading or viewing the manuals. Just do a search for Fadal parts. There you can get the weight and sizes details.
I'm assuming you mean a 3ph 240 commercial which I heard called a 'stinger' leg. Yes, it will run fine, but be sure the transformer is set correctly. If you are talking about 240 single phase then you would need to change the transformer(Best way) or use a phase generator (not as good).
You will need to tell use which spindle motor the machine has and year to answer the tapping question. Some time in the early mid 90's they also offered rigid tapping. That machine would have a HT motorwould tap 9/16steel, I think but I'm not sure on that.