| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-03-2010, 08:42 AM
| |||
| |||
We have a problem with our machine. It will not read discs anymore. We get baud rate detection fail. Can anybody help????  |
|
#2
09-03-2010, 08:43 AM
| |||
| |||
Sorry its a Fadal CNC 88HS |
|
#3
09-03-2010, 09:57 AM
| ||||
| ||||
| The possible issues are: 1. Bad discs 2. dirty read heads 3. Bad ARCOM driver board 4. bad 1270 Interface board 5. bad cable or connection from 1270 to the rear of machine to the 1030 interface card 6. Bad drive Try to load a file thru the RS-232 port at the rear of the machine. If you succeed then you have proven that the 1030 buss interface is ok. Then start tracing the signal loss going backward up to the drive output it self. Neal |
|
#4
09-13-2010, 02:43 PM
| |||
| |||
| Sometimes it works and reads discs then it wont. Can i replace the floppy drive with a one from a PC? |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What RS232 baud rate do you use? and why? | gar | Haas Mills | 68 | 03-08-2011 09:32 AM |
| Need Help!- Getting higher baud rate in V23 | kbspeed | BobCad-Cam | 1 | 08-11-2009 03:54 PM |
| Problem- V-22 baud rate | qualitytool | BobCad-Cam | 0 | 10-20-2008 08:11 AM |
| BX Controller baud rate question | tjs88yj | HURCO | 1 | 04-17-2008 10:50 PM |
| Fanuc O-T baud rate | ttorqueshop | Daewoo/Doosan | 6 | 12-13-2007 12:57 AM |
| | |
Linear Mode
