Tool change error


Results 1 to 3 of 3

Thread: Tool change error

  1. #1
    Member
    Join Date
    Nov 2007
    Location
    Thailand
    Posts
    330
    Downloads
    0
    Uploads
    0

    Default Tool change error

    Hi Guys,

    Have a new error to play with today.

    DATC came in to make a tool change but the tool had stuck in the taper. This stopped the arm and errored out.

    Machine: FADAL 3016 - Fanuc 0i

    I have following alarms:

    2077
    2063
    2044

    The last alarm (2044) is the one that's bothering me as it says: Tool arm overload trip maintenance must reset overload

    Any tips how I do this?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2007
    Location
    USA
    Posts
    339
    Downloads
    0
    Uploads
    0

    Default

    When these things trip they pop out..... all you have to do is make sure power is off go into your electrical cabinet and look for the reset buttons. Just push it back in and you are good to go.

    We all live in Tents! Some live in content others live in discontent.


  3. #3
    Registered
    Join Date
    May 2010
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    Matt
    Look at how the arm is centered to the spindle.
    I have a 4020 with a DATC and the arm was off .015 to the spindle.
    The factory did not align the arm correctly.
    This can be a on going problem if you don't correct it.
    If you have any more issures call me and I can help.
    I do all my own repairs on my machines.
    Dan 616-318-5357
    Good luck



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tool change error

Tool change error