![]() | |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fadal Discuss Fadal machinery here! |
| This forum is sponsored by: |
![]() |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
| |||
| |||
| I know there are some old threads on this, but after some digging around I found a few distributors and figured I would post the info for anyone looking for the stuff. Dow distributes directly to Hubbard Hall their phone number is 203-756-5521 They have distributers across the country. There are two in the Southern California area. 1.) Loyalty 949-654-9510 (Los Angeles) 2.) Golden West Lubricants 626-442-3009 (South El Monty and Pomona) Golden West was a bit cheaper @ $147.00 for 5 Gal. There are two other companies Dow directly distributes to that I did not call, they are: 1.) Ashland 800-531-7106 2.) Brenntag 800-852-0372 |
|
#4
| ||||
| ||||
| FadalCNC.com stuff is most likely a mix with water. So you can probly buy it 100% concentrate or mixed. If your going to do it then do it right and buy it mixed so you can guarantee its not mixed with contaminated water. IIRC
__________________ We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts If you have a broken down Fadal give a shout. |
|
#5
| |||
| |||
| The factory offers the same stuff called CCA-HT for $23.00 per gallon. Fadal engineers have determined this is chemically the same as DowFrost. Call 818-727-2100
__________________ Pat Grantz Director Chatsworth Service Center - Fadal Machining Centers LLC |
| Sponsored Links |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie- Mounting the PCB directly to a heatsink for better heat transfer? | Hirudin | Gecko Drives | 2 | 04-22-2009 02:10 PM |
| Heat Transfer Prop. of Pratley "Steel Quickset" | Bryan GD | General Material Machining Solutions | 0 | 04-07-2009 07:32 AM |
| to heat or not to heat - that is the question? | stirling | Stepper Motors and Drives | 15 | 09-04-2007 03:44 AM |
| Dowfrost | mad mark | Fadal | 13 | 01-30-2007 09:07 AM |
| Antifreeze instead of Dowfrost | Jedi | Fadal | 6 | 11-09-2006 01:43 PM |