HELP WITH MACH3 MILL

Results 1 to 3 of 3

Thread: HELP WITH MACH3 MILL

  1. #1
    Registered
    Join Date
    Sep 2015
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default HELP WITH MACH3 MILL

    Hi guys... anyone uses mach 3? Newbie here and I need help on the program. Had this installed a couple of years back and was getting back into it recently. On the Mach3 Mill home screen, I clicked on the button "SIMPLIFY SCREEN" and this happened... can't find how to bring it back to the default screen. The TURN and PLASMA screens are OK... except for this... bummer



    Similar Threads:
    Attached Thumbnails Attached Thumbnails HELP WITH MACH3 MILL-mach3-jpg  


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: HELP WITH MACH3 MILL

    View Menu > Load Screens > Choose 1024.set

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Sep 2015
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: HELP WITH MACH3 MILL

    WHOOOO GREAT! Thanks!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP WITH MACH3 MILL

HELP WITH MACH3 MILL